When cutting leather trimming device with pieces of leather, for a while to accumulate may not have influence, if it is a long-term accumulation, will have a severe effect to the time limit for a project, even will affect the effect of cutting, this to our influence is not half a week.
If cutting process produces a large amount of pulverized we must be clear in time, trimming device after a period of time at work must stop work to clean up, while the blade can be replaced together, by the way.
If you want to leather material design, cutting of good, really can not be the trouble, must carefully examine, such as the material all together, and then add new blades. If you don't know the blade is need to change regularly, so be sure to replace, but also to stop working on cleaning blade residue, such change is the normal procedures. Will greatly improve the efficiency of the trimming, won't make for replacement to stop work and reduces the working efficiency, knife, after all, don't miss your job. If the bar cutting blade will do a good job, also can reduce the work intensity and difficult problem, greatly improve the quality of leather products.
If the blade on the pulverized, also can increase the wear at work, it is very bad for trimming device itself, and it's easy to affect the leather cutting effect. Leather is cut into article is in order to have a uniform expression, to give the appearance of the leather products better. If there is the phenomenon of pulverized is not good, which can cause product appearance is not beautiful, reduced the degree of fine products, so as to bring down the grade of the product. Blade cut short service life, will be ready in advance, so the factory also regularly changing the blade.